Quick Shipment for Full Safety Sensor Replacement

Language:

Industrial Automation Security Solutions

A professional manufacturer specializing in replacement services for safety sensors.

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

Home / All / Schmersal Replacement / SCHMERSAL Safety Edges Replacement /

For Schmersal SE-P40 Series Safety Edges Replacement | SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M

Name: For Schmersal SE-P40 Series Safety Edges Replacement | SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M
Brand: DADISICK
SKU: 18461989
Rating: 4.75 (10 reviews)

Categories	SCHMERSAL Safety Edges Replacement
Brand	DADISICK
Model	SE-P40 Series \| SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M
Series:	SE-P40 Series
Sensor length:	2.5 m
Actuation distance:	9 mm
Actuation force:	92 N
Response time:	＜ 16 ms
Cross-sectional area:	25 mm × 38 mm
Material:	Perbunan® NBR
Degree of protection:	IP67
Certifications:	TÜV
Update Time	Dec 4,2024

Detail Information

For Schmersal SE-P40 Series Safety Edges Replacement Parameter

Brand	From network	DADISICK
Models	SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M	DB-PSE-245
Detection method	Photoelectric	Pressure-sensitive
Sensor length	2.5 m	200 mm to 6000 mm
Actuation distance	9 mm	＜ 3 mm
Actuation force	92 N	≤ 25 N
Overtravel distance	27 mm (400 N)	＜ 30 mm
Response time	＜ 16 ms	13 ms
Cross-sectional area	Width: 25 mm, Height: 38 mm	Width: 25 mm, Height: 45 mm (base not included, base height: 14 mm)
Maximum operation angle	—	＜ 90°
Material	Perbunan® NBR	EPDM
Degree of protection	IP67	IP65
Connection	—	2 meters VVR Ø 4 mm 2 × 0.35 mm² (Red/black core)
Certifications	TÜV	TÜV
Mechanical life	＞ 20,000,000 Operations	＞ 3,000,000 times
Ambient operating temperature	-30°C to 140°C	-20℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety edges is a safety part made by DADISICK, not official brand Schmersal's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DADISICK Pressure-sensitive Safety Edges

DB-PSE series safety edges

Models：

DB-PSE-108

DB-PSE-110

DB-PSE-215

DB-PSE-230

DB-PSE-245

DB-PSE-345

DB-PSE-360

Data sheet download

DB-PSE Series Satety Edges Dimensions

DB-PSE Series Satety Edges Cross-sectional area

DB-PSE Series Satety Edges's Base dimensions

FAQ

How does a Pressure Sensitive Safety Edge work?

When pressure is applied to the safety edge, it compresses and activates internal sensors. These sensors send a signal to a control unit or safety relay, which then triggers a response such as stopping or reversing the movement of the equipment to prevent harm.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.