Quick Shipment for Full Safety Sensor Replacement

Factory Commendation

Language:

English

English

Industrial Automation Security Solutions

A professional manufacturer specializing in replacement services for safety sensors.

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

Home / All / ABB Replacement / ABB Safety Mats Replacement /

For ABB ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement

Name: For ABB ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement
Brand: DADISICK
SKU: 18458793
Rating: 4.75 (10 reviews)

Categories	ABB Safety Mats Replacement
Brand	DADISICK
Model	ASK-Series \| ASK-1T4.4-NP 1x1
Series:	ASK-Series
Activation force:	Nominally 150 N (Round body 80 mm)
Maximum load:	2000 N over Ø 80 mm
Response time:	Please refer to the following
Material:	Black polyurethane
Degree of protection:	IP65
Certifications:	cULus, TÜV
Update Time	Nov 21,2024

Detail Information

For ABB ASK-Series 1000 mm x 1000 mm Cast-in Ramp Edge Trim Safety Mat Replacement Parameter

Brand	From network	DADISICK
Models	ASK-1T4.4-NP 1x1	DT15-100X100
Dimensions	1000 mm × 1000 mm × 14 mm	1000 mm × 1000 mm × 15 mm
Activation force	Nominally 150 N (Round body 80 mm)	20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	2000 N over Ø 80 mm	400 N/cm²
Response time	Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms Including Pluto incl. Pluto bus: Normal condition: < 40 ms At fault condition: < 70 ms	18 ms
Material	Black polyurethane	NBR
Degree of protection	IP65	IP65 / IP67
Certifications	cULus, TÜV	TÜV
Connection	M8	Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,000,000 times	＞ 3,000,000 times
Ambient operating temperature	-10℃ to 55℃	-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,

DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,

DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,

DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

How should pressure sensitive safety mats be maintained and tested?

A: Regularly clean the surface of the mat to prevent dust and debris buildup. Test the mat's functionality periodically according to the manufacturer's recommendations, ensuring it operates correctly. Testing methods usually involve applying known pressure and verifying the control system's response.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.