Quick Shipment for Full Safety Sensor Replacement

Factory Commendation

Language:

English

English

Industrial Automation Security Solutions

A professional manufacturer specializing in replacement services for safety sensors.

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

Home / All / Rockwell Automation Replacement / Rockwell Automation Safety Mats Replacement /

For Rockwell Automation 440F Series 500 mm x 600 mm Pressure-sensitive Safety Mats Replacement

Name: For Rockwell Automation 440F Series 500 mm x 600 mm Pressure-sensitive Safety Mats Replacement
Brand: DADISICK
SKU: 18458715
Rating: 4.75 (10 reviews)

Categories	Rockwell Automation Safety Mats Replacement
Brand	DADISICK
Model	440F \| 440F-M1012BYNN
Series:	440F Series
Activation force:	35 kg (77 lb)
Maximum load:	Can withstand a static pressure of 4500 psi
Response time:	35 ms
Material:	Polycarbonate
Degree of protection:	IP67
Certifications:	CE, cULus
Update Time	Nov 21,2024

Detail Information

For Rockwell Automation 440F Series 500 mm x 600 mm Pressure-sensitive Safety Mats Replacement Parameter

Brand	From network	DADISICK
Models	440F-M1012BYNN	DT15 Series Safety Mats
Dimensions	500 mm × 600 mm × 16 mm
Activation force	35 kg (77 lb)	20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	Can withstand a static pressure of 4500 psi	400 N/cm²
Response time	35 ms	18 ms
Material	Polycarbonate	NBR
Degree of protection	IP67	IP65 / IP67
Certifications	TÜV, CE, cULus, UKCA, RCM	TÜV
Connection	M12	Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,000,000 times	＞ 3,000,000 times
Ambient operating temperature	-10℃ to 55℃	-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Rockwell Automation's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,

DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,

DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,

DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

How are pressure sensitive safety mats installed?

A: Pressure sensitive safety mats are usually installed on the floor in the area to be monitored and connected to the safety control system. Ensure the mat is flat and unobstructed during installation, and follow the manufacturer's instructions for electrical connections.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.