Quick Shipment for Full Safety Sensor Replacement

Factory Commendation

Language:

English

English

Industrial Automation Security Solutions

A professional manufacturer specializing in replacement services for safety sensors.

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

Home / All / OMRON Replacement / OMRON Safety Mat Replacement /

For Omron UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats

Name: For Omron UMA Series 500 mm x 400 mm Safety Mats Replacement | 2-cable Mats
Brand: DADISICK
SKU: 18458691
Rating: 4.75 (10 reviews)

Categories	OMRON Safety Mat Replacement
Brand	DADISICK
Model	UMA Series \| UMMA-0500-0400-2, UMMYA-0500-0400-2
Series:	UMA Series
Activation force:	300 N min. to 80 mm dia. test piece
Maximum load:	2,000 N to 80 mm dia. test piece
Response time:	50 ms max
Material:	Polyurethane
Degree of protection:	IP65
Certifications:	CE
Update Time	Nov 21,2024

Detail Information

For Omron UMA Series 500 mm x 400 mm Safety Mats Replacement Parameter

Brand	From network	DADISICK
Models	UMMA-0500-0400-2	DT15-50X40
	UMMYA-0500-0400-2
Dimensions	500 mm × 400 mm	500 mm × 400 mm
Activation force	300 N min. to 80 mm dia. test piece	20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	2,000 N to 80 mm dia. test piece	400 N/cm² (up to 8 h)
Response time	50 ms max	18 ms
Material	Polyurethane	NBR
Degree of protection	IP65	IP65 / IP67
Certifications	CE	TÜV
Connection	2/5/10 meters M8 4-pin	Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,000,000 times	＞ 3,000,000 times
Ambient operating temperature	-10℃ to 55℃	-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Omron's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,

DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,

DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,

DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

How do safety mats connect to machines?

A: Safety mats connect to machines through internal membrane switches. When a set weight is applied to the mat, the switch closes, sending a stop signal to the protected machine to halt its movement.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.