Quick Shipment for Full Safety Sensor Replacement

Factory Commendation

Language:

English

English

Industrial Automation Security Solutions

A professional manufacturer specializing in replacement services for safety sensors.

As a safety sensor manufacturer, we are committed to providing top-quality replacement services with superior performance at competitive prices, tailored to meet your needs.

Home / All / ABB Replacement / ABB Safety Mats Replacement /

For ABB ASK-Series Aluminum Edge Safety Mat Replacement

Name: For ABB ASK-Series Aluminum Edge Safety Mat Replacement
Brand: DADISICK
SKU: 18453550
Rating: 4.75 (10 reviews)

Categories	ABB Safety Mats Replacement
Brand	DADISICK
Model	ASK-Series \| ASK-1U4.4-NP
Series:	ASK-Series
Activation force:	Nominally 150 N (Round body 80 mm)
Maximum load:	2000 N over Ø 80 mm
Response time:	Please refer to the following
Material:	Black polyurethane
Degree of protection:	IP65
Certifications:	cULus, TÜV
Update Time	Nov 21,2024

Detail Information

For ABB ASK-Series Aluminum Edge Safety Mat Replacement Parameter

Brand	From network		DADISICK
	Models	Dimensions	Models	Dimensions
Technical data	ASK-1U4.4-NP	1000 mm × 1500 mm × 14 mm	DT15-150X100	1000 mm × 1500 mm × 15 mm
		1000 mm × 1000 mm × 14 mm	DT15-100X100	1000 mm × 1000 mm × 15 mm
		1000 mm × 750 mm × 14 mm	DT15-100X75	1000 mm × 750 mm × 15 mm
Activation force	Nominally 150 N (Round body 80 mm)		20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	2000 N over Ø 80 mm		400 N/cm²
Response time	Including Sentry < 20 ms, Including Pluto (single Pluto) < 30 ms Including Pluto incl. Pluto bus: Normal condition: < 40 ms At fault condition: < 70 ms		18 ms
Material	Black polyurethane		NBR
Degree of protection	IP65		IP65 / IP67
Certifications	cULus, TÜV		TÜV
Connection	M8		Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,000,000 times		＞ 3,000,000 times
Ambient operating temperature	-10℃ to 55℃		-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand ABB's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-30X30, DT15-40X40, DT15-50X25, DT15-50X40,

DT15-50X50, DT15-60X40, DT15-75X25, DT15-75X50,

DT15-75X75, DT15-100X25, DT15-100X50, DT15-100X75,

DT15-100X100, DT15-150X50, DT15-150X75, DT15-150X100

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

How are pressure sensitive safety mats installed?

A: Pressure sensitive safety mats are usually installed on the floor in the area to be monitored and connected to the safety control system. Ensure the mat is flat and unobstructed during installation, and follow the manufacturer's instructions for electrical connections.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.