EOS2 Series 40 mm Resolution 12 m Sensing Distance 260 mm to 2260 mm Protective Height XS2 Safety Light Curtain Replacement

The product models displayed on this page are only used to describe and compare the characteristics, specifications, and performance of different products. These models do not represent recommendations or associations for any specific brand or company. When users choose products, please understand and compare the detailed information of each brand's products on your own.

The height position of a safety light curtain refers to the position of the light curtain relative to the upper and lower die openings on the machine. Under the premise of ensuring a safe distance, the lowest beam of the safety light curtain must not be higher than the lower edge of the die opening, and the highest beam must not be lower than the upper edge of the die opening.

The protective height of a safety light curtain refers to the distance between the uppermost and lowermost beams of the light curtain, which represents the effective height of the light curtain. The protective height is equal to the stroke of the machine slide plus the adjustment amount. The size of the protective height is related to the number of safety light curtain beams. If the number of beams is too few, the light curtain height may not fully cover the hazardous area, potentially leading to accidents. On the other hand, if the protective height is too large, it can result in unnecessary expenses and inconvenience in usage. Therefore, selecting the appropriate specifications (number of beams) for the safety light curtain based on the protective height is crucial.

The safety distance of a safety light curtain refers to the shortest distance between the light curtain and the dangerous area of the working mold edge, which is the distance required for the slide to stop from the position where the hand obscures the light curtain to reach the danger boundary. The safety distance is one of the necessary conditions to ensure the protective function of the safety light curtain and must be calculated correctly! The calculation method should be determined based on the braking method of the press.

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.